}
interfaces {
fxp0 {
unit 0 {
family inet {
address
}
}
}
lo0 {
unit 0 {
family inet {
address
}
}
}
}
routing-options {
static {
route 0.0.0.0/0 next-hop
}
}
17. Commit the configuration to activate it on the router.
[edit]
root# commit
commit complete
[edit]
root@
host-name #
18. When you've finished configuring the router, exit configuration mode.
[edit]
host-name # exit
root@
Exiting configuration mode
host-name >
root@
Congratulations. The initial configuration is complete. Remember to also configure the backup Routing Engine if
your MX304 is equipped with redundant control planes. At this point you should be able to remotely access both
of the Routing-Engines as the root user with ssh.
address/prefix-length ;
address/ 32;
destination-IP ;
11