Time Zone - NETGEAR FR114P Reference Manual

Reference Manual for the Model FR114P, FR114W and FM114P Cable/DSL ProSafe Firewall
Click Apply
3.

Time Zone

The NETGEAR ProSafe Firewall uses the Network Time Protocol (NTP) to obtain the current
time and date from one of several Network Time Servers on the Internet. In order to localize the
time for your log entries, you must select your Time Zone from the list.
If your region uses Daylight Savings Time, you must manually check Adjust for Daylight Savings
Time at the beginning of the Daylight Savings Time, and uncheck it at the end. Enabling Daylight
Savings Time will cause one hour to be added to the standard time.
The firewall has a list of publicly available NTP servers. If you would prefer to use a particular
NTP server as the primary server, enter its IP address under Use this NTP Server.
Be sure to click Apply when you have finished configuring this menu.
Security 5-17