Table of Contents
Advertisement
Publication no. 201101
3.3.2
Define input fields
No Field
01:PID
02:NAME
03:B-DATE
04:UNUSED
05:UNUSED
Maximum five entries can be defined. Field types available are; PID, NAME, B-DATE and
TEXT. The maximum number of characters to enter in each field must be set, this is done
in the "Len"-column. A label for each field can be defined, here can any name be entered
with maximum eight characters.
Ex. The definitions above will look like this for the operator while in "Manual data entry to
booking list".
Bookinglist
PID:_
Name:
Birth:
Exit
3.3.3
Link field to patient window
This window is used to set-up a translation table between a TEXT-field defined under 'Define
input fields' and the field number in the Win1 and Win2 window of the Network ID Camera.
Scr
00:
01:
02:
03:
04:
Use F2 and F3 keys to change between Win1 and Win2 columns.
Ex. The B-date field defined in chapter 3.3.2 'Define input fields' shall be linked to field no.
3 in chapter 3.2.2 'Picture Win1/Win2'. We need to enter the number three in column
Win1, row no. 02, see picture above.
3.4 Communication param
Selecting this item will present a window where the communication channels of the Network
ID Camera can be configured. This window works slightly different from the previous win-
dows: instead of presenting a sub-menu where the item to configure is selected, function
keys are used to change what has to be configured. This scheme seemed better suited in
this situation where the user often quickly wants to switch between channels. Apart from
that, there is a protocol-dependent configuration window for each channel, which is opened
October 2005
Len
Label
11 "PID
20 "Name
10 "Birth
10 "
10 "
Previous
Win1
Win2
0
0
3
0
0
0
0
0
0
0
Win1
12
NIC2-2 · Installation and Set-up Manual
"
"
"
"
Next
Save
250 free
261005
Save
Win2
Save
Triacon AB Sweden
Advertisement
Table of Contents
