Table of Contents
Advertisement
Publication no. 201101
Bookinglist configuration
Here all settings for manual entry of data to bookinglist is configured.
Communication param
Here all settings regarding the communication between the Network ID Cam-
era and the equipment connected to any of the four communication ports can
be changed.
NICLan configuration
Here all settings related to a TCP/IP communication is defined.
Here all settings of a more general nature can be changed, e.g. which lan-
Settings
guage the Network ID Camera speaks.
Sensor adjustment
This selection will show a picture showing the status of the three cassette
sensors. For detailed information, please refer to the Service manual.
Test functions
Here parameters regarding the opening of the cassette window can be set.
For detailed information, please refer to the Service Manual.
NOTE: This should only be done by trained service personnel.
Serial analyzer
Here all data, received on HOST or NET serial communication port, is listed.
For detailed information, please refer to the Network Installation Manual.
Remote control
Here the down-/up- load of a set-up is performed.
System logger
Here are listed errors and abnormal situations. For detailed information,
please refer to the Service Manual.
Setup Manager
This entry is only used by the production personal.
3.2 Picture settings
Choosing this selection will present five new alternatives
Picture settings
Picture
Settings Win1:
Picture
Settings Win2:
Menues
Here the layout of the picture printed on the film is defined. Two different pictures can be
defined, "Win1" and "'Win2". This means that it is possible to have two different configura-
tions, one under Picture Win1 and another under Picture Win2. The picture names
are editable to any name corresponding to their use.
October 2005
Win1:
Win2:
Previous
Next
4
NIC2-2 · Installation and Set-up Manual
Exit
Triacon AB Sweden
Advertisement
Table of Contents
