Specifications; Physical Characteristics - HP Vectra VL400 Technical Reference Manual

1 System Overview

Specifications

Specifications

Physical Characteristics

Characteristics
Weight (configuration with 1 CD-ROM
drive, excluding keyboard and display)
Dimensions
Footprint
Acoustic noise emission (IS O7779)
Operating (idle):
Power Supply
Power consumption
Typical:
Suspend to RAM (ACPI s3):
Storage Humidity
As an ENERGY STAR partner, HP has determined that this product meets the
ENERGY STAR guidelines for energy efficiency (Windows 2000, Windows 98 and
Windows 95 only).
Low power consumption (4.8W in suspend mode) can be achieved when
Suspend to RAM is activated. This can be done with ACPI operating systems
only (Windows 98 and Windows 2000). To activate Suspend to RAM, enter
your BIOS Setup by pressing
and make sure that the field
When Suspend to RAM is not activated, or if it is activated in non-ACPI
operating systems, the power consumption in suspend mode will be around
25W.
14
VL400 Desktop PC VL400 Minitower PC
10 kg (22 pounds) 13.4 kg (29.5 pounds)
Width: 43.5cm (17.13in.) Width: 20.6cm (8.15in.)
Height: 13.5cm (5.32in.) Height: 46.9cm (18.46in.)
Depth: 43cm (16.93in.) Depth: 45.5cm (17.9in.)
2 2
0.187 m (2.01 ft ) 0.094 m
Sound power level LwA 3.5 BA (35 dBA)
Sound pressure level at the operator position LpA 26 dBA
Input Voltage: Input Voltage:
100-127 V 4A, 100-127 V 6A,
200-240V 2A ac 200-240V 3A ac
(voltage selection switch) (voltage selection switch)
Input Frequency: 50/60 Hz Input Frequency: 50/60 Hz
Maximum output power: Maximum output power:
120W continuous 200W continuous
115V/60Hz and 230V/50Hz 115V/60Hz and 230V/50Hz
40 W 40 W
4.8 W 4.8 W
8% - 85% (relative), non-condensing at 40°C (104°F)
F2
during startup, then go to the
Suspend to RAM
VL400 SFFactor PC
8 kg (17.6 pounds)
Width: 36.6cm (14.4in.)
Height: 10.1cm (3.98in.)
Depth: 40.7cm (16.14in.)
2 2 2
(1.01 ft ) 0.15 m (1.61 ft
Input Voltage:
100-127 V 2500mA,
200-240V 1300mA ac
(voltage selection switch)
Input Frequency: 50/60 Hz
Maximum output power:
100W continuous
115V/60Hz and 230V/50Hz
40 W
4.8 W
Power
enabled
is set to .
2
)
menu