Sennheiser Evolution Wireless Digital Series Instruction Manual page 192

Establishing a radio link | Synchronizing the receiver and transmitter
Connecting to the EW-D EM receiver / syn-
chronizing the EW-D EM
To establish a radio link between the transmitter and receiver,
we recommend the following procedure.
In order to establish a connection between a receiver and
transmitters of the EW-D series, the devices must always be
synchronized with each other.
To successfully connect a receiver and a transmitter, both
devices must have the same frequency range.
Step 1: Set a free frequency
We recommend using the AUTO SCAN function, as this is the
most reliable way to identify free frequencies (see „AUTO
SCAN menu item").
If you know free frequencies in your area, you can also set the
frequency manually (see „CHANNEL menu item" or „TUNE
menu item").
Step 2: Pairing a receiver with a transmitter
Short-press the SYNC button on the receiver.
▷
The blue DATA LED flashes.
►
Short-press the SYNC button on the transmitter.
▷
The blue DATA LED flashes.
►
191