Sennheiser Evolution Wireless Digital Series Instruction Manual page 185

EW-DX SK | EW-DX SK 3-PIN bodypack transmitter
3
Press the UP or DOWN button to set the desired value.
▷
Press the SET button to confirm your selection.
▷
If you set a value for the channel in the Cable Emul. menu
item on the receiver and then synchronize the receiving
channel with the transmitter, the value entered in the
transmitter is overwritten with the value entered in the re-
ceiver.
this feature to level out the system, for example.
• Setting range: Off, -90 dB to 0 dB in 6 dB increments
Press the UP or DOWN button to set the desired value.
▷
Press the SET button to confirm your selection.
▷
Cable Emulation menu item
In this menu item, you can emulate in-
strument cable lengths.
•Setting range: Off, Type 1, Type 2, Type
Test Tone menu item
In this menu item, you can activate a test
tone that the transmitter transmits in-
stead of the input signal. You can use
Mute Button menu item
In this menu item you can set the func-
tion of the transmitter's mute switch.
184