Transmitter Battery - Sennheiser Evolution Wireless Digital Series Instruction Manual

Radio frequency level:
Displays the RF signal strength for the respective channel.
Link quality:
Displays the transmission quality for the respective channel.
On the one hand, the transmission quality depends on the
f i e l d str eng t h ( RF l eve l i nd i cat or on t he d i sp l ay ). Ho w ever,
on the other hand, it also depends on external sources of
interference that cannot be identif i ed on t he RF l eve l i nd i -
cator (for example, they may be on the same frequency or
a very close neighboring frequency or may not affect the
f i e l d str eng t h ).
As a basic principle, a value signif i can tl y h i gher t han 50 %
should be achieved for a secure transmission.
Link name:
You can assign a name to the radio link in the receiver menu
(see „Ch 1 / Ch 2 -> Name menu item").
Frequency:
You can set the frequency of the radio link manually or using
the Auto-Setup function.
• See „Ch 1 / Ch 2 -> Frequency menu item"
• See „Ch 1 / Ch 2 -> Scan / Auto Setup menu item"
Transmitter audio level:
Displays the audio input level for the respective channel (see
„Ch 1 / Ch 2 -> Gain menu item").
This level is separate from the audio level that is output from
the receiver (see „Ch 1 / Ch 2 -> AF Out menu item").

Transmitter battery:

Indicates the charging status of the transmitter's BA 70 re-
chargeable battery or batteries.
EW-DX EM 2 rack receiver
99