First Start-Up; Setting Up And Switching On - Dometic AirCon ASC 1000 Operating Manual

ASC_RPA_de_en_nl_da_sv.book Seite 59 Dienstag, 5. Februar 2008 3:10 15
6

First start-up

6.1

Setting up and switching on

1. Wheel the AirConServiceCenter to the workplace and lock the front
During operation, the device must be on a level, flat surface so that
measurements can be made correctly.
2. Undo the knurled screw (10) of the transport lock on the bottom of the
3. Connect the AirConServiceCenter to the mains.
4. To switch it on, set the main switch (23) to I.
 The AirConServiceCenter subsequently runs a software test.
AirConServiceCenter
wheels (11).
AirConServiceCenter as far as it will go.
The display (6) shows the software version number for
several seconds:
WAECO INTERNATIONAL
ASC
The ASC2000RPA additionally displays an instruction to inspect the
refrigerant analysis filter (see "Changing the filter for refrigerant
analysis (ASC2000RPA only)" on page 82):
Software test.
Check refrigerant
analysis filter.
10
2000 SW 5.06
RPA DB 1.07
SN 000000
First start-up
59