b Slit portion for side piping on the front grille (same on the other side)
c Slit portion for side piping on the bottom frame (same of the other side)
d Slit portion for the bottom piping
1 Cut off the slit portion using nippers.
2 Remove an burrs along the cut section using a half round needle file.
6.4.1
General guidelines..................................................................................................................................................
6.4.2
To connect the drain piping to the indoor unit .....................................................................................................
6.4.3
To check for water leaks ........................................................................................................................................
▪
Pipe length. Keep drain piping as short as possible.
▪
Pipe size. Use rigid polyvinyl chloride pipe with 20 mm nominal diameter and