Advertisement
6. Attach the two remaining hooks on the top of the tent to the Center Support Post. (Fig. 6)
7. Attach hooks on the corners of the tent to the Gold End Poles; then the hooks on the front & back of the tent to the
Chrome Center Poles. (Fig. 6)
8. Stretch corners and front & back of tent until floor is taut; then hammer stakes through loops on web straps to
secure. (Fig. 6)
Bedroom
Area
Stake through loop in six web straps on tent
9. Unfold Rainfly and pull it over the tent frame. (Fig. 7)
NOTE: The windows need to be placed over the Bedroom Area and the right and left side awning flaps need to be
positioned over the Screen Living Area.
Plastic Window
4
Screened Living
Area
FIG. 6
Awning Flap
FIG. 7
10. Unzip all Awning Flaps and Doors on the Rainfly.
11. Locate all 34 hook and loop fasteners, on under side of Rainfly, and wrap around all Gold and Chrome Leg Poles
to secure. (Fig. 8)
IMPORTANT: All hook and loop fasteners must be secured to provide more stability in windy conditions.
12. Insert plastic locking tabs, located on corners and front & back of Rainfly, into plastic sleeves on web straps
of tent. (Detail C)
13. Extend out guylines on front, back, and sides of tent and stake to secure Rainfly and tent (Fig. 9)
NOTE: Make sure guylines, located on left and right side of the Rainfly Awning Flap, do not interfere with access
to the doors of tent.
Plastic
Locking
Tab
Plastic
Sleeve
Detail C
Hook & Loop
Fastener
FIG. 8
Awning Flap
Guyline
The X4 tent assembly is complete. Proceed to the Tent Configuration
Section, on page 6, for the variety of ventilation options available with
your tent for its enjoyment in any weather condition.
FIG. 9
5
Advertisement
