Advertisement
The VideoMate 2250 is exported throughout the world to
countries with different mains voltages. The projectors
are set to a fixed mains voltage at the factory.
120v Mains
Shipments to countries with 120v mains will be equipped
with a 4A fuse.
220, 230 or 240 Mains
Shipments to countries with 220, 230 or 240v mains will
be equipped with a 2A fuse.
Before you switch on your projector, make sure that
the voltage is correctly adjusted!
An incorrectly adjusted mains voltage can damage the
projector. The voltage Indicator must show your
country's actual mains voltage.
1. Pull out the fuse link compartment by gripping the
small catch.
2. Push the fuse link into the compartment so that the
applied voltage can be seen in the window of the
compartment.
3. Push the loaded compartment (with mounting under-
neath) firmly into the projector opening provided.
For safety, the mains lead must be unplugged.
Make sure that the 120v setting uses a different fuse
than the 220/240v setting.
8
Advertisement
