Connecting the power cord for a PSR450-12AHD power
module
Slide the cable clamp onto the tie mount on the power module, as shown in
1.
Connect the female connector of the power cord to the power receptacle on the power module,
2.
as shown in
Close the cable clamp and slide it forward until it is flush against the edge of the female
3.
connector, as shown in
Connect the other end of the power cord to an AC or DC power source.
4.
Figure 33 Connecting the power cord for a PSR450-12AHD power module (1)
Figure 34 Connecting the power cord for a PSR450-12AHD power module (2)
Figure 35 Connecting the power cord for a PSR450-12AHD power module (3)
Connecting the DC power cord for a PSR450-12D power
module
Correctly orient the DC power cord plug and insert the plug into the power receptacle on the
1.
power module.
Figure 34
Figure
35.
21
Figure
33.
2