To Register A Bluetooth Device - NEC N600i User Manual

Nec n600i: user guide
Hide thumbs Also See for N600i:
Table of Contents

Advertisement

Press Options and the following functions are
available.
No Options
1
Information Displays information on the selected
device.
2
Search
Searches for nearby Bluetooth devices
to register.
3
Pairing
Changes the handset status to bonding
standby
wait status in which the handset waits
for
the
devices in order to register the devices.
4
Terminal
Displays the Bluetooth information of
Info.
the handset. The device name can be
edited, in which case, the edited device
name is displayed at the other party's
Bluetooth device.
5
Remove
Deletes the registered devices from the
device
list.
6
Stop all
Disconnects all Bluetooth connections.
7
Timeout
Sets the timeout values. The default is
settings
as follows:
Discoverable: 0 minutes
Search: 10 seconds
Paring timer: 5 minutes
Depending on the conditions, some options may
be greyed out and not be available
authentication
from
other

To register a Bluetooth device

If the external device is not yet registered on the Bluetooth
screen, register it by the following procedures:
• Searching the device from N600i
1. Press Options to execute Search
Available devices are found and displayed.
2. Select the target device from the searched list
3. Enter a passkey on N600i.
Enter the same passkey to the target device.
4. Relevant device is registered after authentication is
complete
• Operating N600i from the target device
1. Execute Pairing standby to put N600i in standby
mode.
2. A passkey screen appears when receiving
registration request from the target device
3. Enter a passkey.
4. Each device is registered after authentication is
complete
Passkey is the Bluetooth PIN code for the remote device.
A passkey is a number from 1 to 16 digits.
Before Bluetooth can communicate with a PC,
ensure the Bluetooth Driver is installed.
There may be Bluetooth devices that cannot be
connected to your N600i
Depending on the connection status, a Bluetooth
device may not function correctly. In such a case,
retry operation from the device side, or switch
your N600i off and on.
45
External connection (M7)

Advertisement

Table of Contents
loading

Table of Contents