To Create And Send A New Message; To Read A Message - NEC N600i User Manual

☛
Press 7 (Settings) on the Messages screen and the
following menus are available
No Settings
1 Communication
1 Status Sets to send the status report or not.
report Request report and No report
request are available.
2 Validity Selects the period of time SMS is
period stored on the server while trying to
deliver the SMS message.
3 SMS Edits the SMS message centre
centre address. This address is saved in the
USIM card.
4 SMS over Sets GPRS or GSM to transmit SMS.
GPRS
2 Edit
1 Signature Turns
setting insertion function on/off and edits the
signature.
2 Quote Edits the quoted reply mark.
indicator
3 View
1 Scrolling Selects the number of lines scrolled
when you press the Up or Down key.
2 Font size Sets the font size (Large, Medium,
Small).
4 CB settings
Broadcast message is a network-dependent
service. Please contact your local provider for
details.
1 Index Sets up to 6 indexes for the CB
settings messages.
CB Selects the language for the CB
language message.
5 Reset Clears
settings Settings.
Messages (M2)
the automatic signature
the settings set under

To create and send a new message

☛
Press 1 (New SMS) or SK2 (NEW) on the Messages
screen, and follow the steps below:
1 Select the addressee field on the New message
screen and press the Enter key to display the
address list screen.
• Press the Enter key to put the addresses, or
choose Options to select Open Contacts for
entering the phone numbers from the Contacts.
(Up to 5 addresses are available for entries.)
2 Select the text entry field to enter the message and
press the Enter key.
3 Press the SK1 (SEND) to send the message.
The message is sent and saved in the Sent folder.
To set the addressee from the contact entries;
Press the SK2 (FIND) on the addressee entry box and
select the addressee's phone number.
To save an unfinished and unsent message;
Press the SK2 (SAVE). The message is saved in Draft.

To read a message

☛
2 (Messages) and select 2 (Inbox). Follow the
steps below:
1 Select the message.
2 Press the Enter key and the message contents are
displayed.
To filter the received messages by a condition;
Press Options and select 7 (Filter view). the following
options are available: Show all, Read messages,
Unread messages, USIM card, Handset memory,
Send failed, Unsent.
To sort the messages;
Press Options and select 6 (Sort messages). You can
↑
use By date (date ascending), By date
descending), By address
↓
address (address descending).
To move a message;
Select the message and press the Options to select 3
(Move message). Select the move destination (USIM
card memory is available.), and then press the Enter key.
26
↓
(date
↑
(address ascending), By