Table of Contents
Advertisement
Setting up your N600i
This section explains how to prepare your phone for use.
Before you use your phone you must do the following:
• Insert a valid USIM (Universal Subscriber Identity
Module) card
• Insert the TransFlash™ memory card
• Charge the battery
• Set the date and time
TransFlash memory card is shipped with N600i.
How to insert or remove the USIM
card or TransFlash memory card
Your N600i includes the USIM card that must be inserted
into your phone, and TransFlash memory card that is used
as an external storage media.
TransFlash package includes an adapter with which you
can transfer the data in TransFlash to PC.
The USIM card and TransFlash memory card holders are
located underneath the battery. If the USIM card is
removed, then the phone becomes unusable until a valid
USIM is inserted.
Always
disconnect
accessories from your phone before inserting and
removing your USIM card.
Ensure that the power is off. If the power is on, press
and hold
until power is off.
Handle with care for insertion or remove of the USIM
card and TransFlash memory card
the
charger
and
other
The following diagram shows how to Insert/remove the
USIM card or TransFlash memory card. Look at carefully
and follow this instruction.
☛
Slide and remove the battery cover.
About 3mm
☛
If the battery is inserted, remove this.
4
3
9
Rear cover
2
1
Battery
Introduction
Advertisement
Table of Contents
