Table of Contents
Advertisement
☛
Move the stamp position
☛
SK1 when finished applying the stamp (the stamp preview will not be applied this time)
Adding a frame to the image
☛
Highlight or display the image file you wish to edit
various frames by ▲ and ▼
Saving the edited image
☛
After any edition, SK1 or
SK1 to check the expected size of the image.
☛
Edit the name (if required)
Printing an image using a printer
You can print an Exif format image file by connecting your phone to a PictBridge compatible printer using a USB cable (option).
There may be PictBridge compatible printers that cannot be connected to your phone.
Refer to the operation manual of the printer for details on the printing.
☛
▼ 3 or
6 3
➔
Highlight a folder
"Print via USB" may be displayed in gray and unavailable, depending on the image file.
☛
Connect your phone and the printer with the USB cable
☛
Check the print detail screen displayed
☛
To print as seen on the detail screen, SK1
☛
To edit the print detail and then print,
➔
SK1
The Options menu may change depending on the connected printer.
If any interruption or error occurs, or the printing is not completed normally, pull out the USB cable and start again from the first step.
No. Print via USB Options menu
1
Number of prints
2
Layout detail
3
Print quality
4
File name
5
Date
If you want to print multiple images on one sheet, set both the settings for Number of prints and N-up on Layout screen under Layout detail.
For example, 4 for Number of prints and 2 for N-up will print 2 sheets with 2 half-sized images per sheet.
My data (M6)
60
➔
to confirm
➔
The stamp preview is displayed again. Repeat applying if necessary, or
➔
➔
to confirm.
to save the edited image
➔
➔
➔
➔
Highlight an image file you wish to print
on the print detail screen to display the Options menu
Sets the number of prints to output.
Selects the paper size, paper type and layout to print the image file.
Selects the required quality of printing.
Selects whether or not to print the file name on the paper.
Selects whether or not to print the date on the paper.
➔
➔
1 7
Highlight a frame
Select the Save Quality
➔
Prepare the printer ready for printing, referring to its manual
to preview the resulting image
➔
2 4
➔
Edit the detail using the Options menu
to select another stamp.
➔
Scroll through the
Advertisement
Table of Contents
