Phone Modes (M12) - NEC N411I - MANUAL 2 User Manual

No. Phone
6 Language Selects the language the phone displays.
When you have switched the language to be displayed, please wait until the new setting becomes active.
7 LED Selects the Light Emitting Diode (LED) colour for incoming calls/SMS/Mail or during a call.
If the personal setting or the Group setting for the LED colour is also set in the phonebook, it has priority over this LED setting.
(See "Allocating a LED colour" on page 49 for details.)
8 Earphone Selects the earphone type from Stereo or Monaural, depending on your earphones (headset).
type

Phone modes (M12)

Your phone can be set to one of the following modes: Normal mode, Meeting mode, Pocket mode or Car mode.
Any changes made to the settings while in a particular mode will be stored and used when that mode is selected again.
Selecting your phone mode
☛
▲ or 1 2 ➔ Press the appropriate key for the required mode.
You can also set the Meeting mode or return to the previous mode by pressing and holding ▲ on the standby screen.
Editing the mode settings
☛
▲ or ➔
1 2 Highlight the required mode
For any volume setting, use ▲ ▼, Side keys or alphanumeric keys (0 to 9).
When you change any volume setting while a headset is connected, the changed volume will be valid only when you have a headset connected.
No. Phone mode setting
1 Ringer Selects the Sound or Video for incoming calls. (See "Sounds (M62)" on page 58 or "Videos (M61)" on page 58 for details.)
2 Ringer volume Sets the sound volume for incoming calls.
3 SMS tone Selects the ringtone for incoming SMS messages. (See "Sounds (M62)" on page 58 for details.)
➔
SK1
If the Video is set, it will sound and will be displayed regardless of the CLI picture setting for the personal data in
Phonebook. (See "Allocating a picture as a CLI" on page 49.)
While receiving a call with your phone open, the ringer volume can also be adjusted by pressing the Side keys.
While using a wired headset, you can set the volume for the wired headset. The volume settings for the wired headset
and the speaker of the phone are saved individually.
While using a Bluetooth headset and a Bluetooth hands-free kit, however, the volume setting for the speaker of the
phone is used.
➔
Press the appropriate number for the required setting in the following table.
21
Settings (M1)