Activating And Terminating A Camera Function; Taking A Picture - NEC e232 User Manual

Activating and terminating a Camera function

With the standby screen displayed, press
You can also access the Camera finder screen by pressing
Press CLR or Softkey 2 to return to the previous screen from the Camera finder screen or press

Taking a picture

Taking a picture
Activate the Camera function.
Look into the Camera finder screen and adjust the camera position to place the target on the screen.
Hold the Camera still, and press
Check the picture. If successfully taken, press
The default file name for the picture is the date, month, year, hour, minute and second from the date and time settings of your phone.
The picture is saved as a JPEG file in the Photo folder (see page 68).
If a call comes in while you are checking or storing a photographed image, image storage is cancelled. When this occurs, the next time you select
Camera function, a message appears to say that you have an image that was not stored, allowing you to check and store the image.
Using the Light
With the Camera finder screen displayed, press Softkey 1 to activate or deactivate the Light.
Take care not to hold the Light too close to your or other people's eyes when the Light is lit.
Zoom
With the Camera finder screen displayed, press the
Controlling brightness
With the Camera finder screen displayed, use the
displayed on the left of the Status icons area.
to display the Camera finder screen on your Main-LCD.
or the Side up key.
.
or key to activate or deactivate the Zoom mode.
and keys to control the brightness level of the picture. The current brightness level is
and 5 from the standby screen.
to return to the standby screen.
51