Changing The Battery - NEC e232 User Manual

Nec e232: user guide
Table of Contents

Advertisement

Changing the battery

Be sure to turn the phone off before replacing the battery pack.
While pressing down the area (A) of the rear cover, especially the place indicated by the arrow , slide the rear cover in the direction of arrow
with your finger tip. Then, lift the cover up in the direction of arrow
With the caution of the label on the battery pack facing upwards, insert it into the cavity in the phone body in the direction of arrow , making sure
that the tabs on the battery pack fit properly into the notches in the phone. Then press the battery pack down in the direction of arrow
into the phone.
Make sure that the battery pack is securely attached to the phone and align the rear cover with the grooves on the phone so that there is a gap
of about 3 mm at the end of the cover. Then, while pressing down as indicated by arrow , slide the rear cover in the direction of arrow
you hear a click.
Rear cover
(A)
Do not scratch the phone body or the rear cover with your finger nail, when removing the rear cover.
Do not press too firmly on the rear cover and the phone body. The use of excessive force could damage the rear cover and the phone body.
to remove it.
Notches
Tabs
About 3 mm
Check that there is no gap
between the rear cover 
and the phone body.
to clip it
until
5

Advertisement

Table of Contents
loading

Table of Contents