International Dialling Codes; Auto Redial; Line Identification - NEC e232 User Manual

Nec e232: user guide
Table of Contents

Advertisement

Auto redial

With the Auto redial facility, your phone will redial a number up to 10 times if the first attempt fails. A tone will be heard at each redial attempt. Your phone
cannot connect a call if the other party is busy or if there are network problems. Pressing Softkey 2 during a redial attempt will abort it. To set redial On
or Off, use the following procedure.
With the Calls screen displayed, press 3 to display the Auto redial screen.
Press 1 to activate or press 2 to deactivate the Auto redial facility.

Line identification

The Line identification facility is network dependent.
The Line identification enables you to choose whether or not to send your own phone number when you make a
call and also whether or not to display a caller's phone number when you receive a call. To set Line identification,
use the following procedure.
With the Calls screen displayed, press 4. The Line ID screen is displayed with a
and a
over a deactivated line.
To set the status of each line (see table right), use the
selected).
Press Softkey 1 to set the Line identification On or Off.
Press
to save the current settings.

International dialling codes

When you make an international call from any country, you must start by dialling a special international access code. Your phone has the facility to prefix
a + symbol to the numbers, so that you need not enter the access code for the country that you are calling from.
Entering international dialling codes
With the standby screen displayed, press and hold 0. The 0 character displayed will change to a + character.
Key in the country code, area code, and phone number that you wish to call.
The UK country code is always 44, no matter what country you are dialling from. For example, a typical UK number of 01189 123456 is entered as:
International access country code
+
44
12
and
keys to select a line (the line will flash when
area code
phone number
1189
123456
Line type Setting
Outgoing Send own #
over an activated line
Incoming Show Incoming #
Show connected #
Return own #

Advertisement

Table of Contents
loading

Table of Contents