Refer to the below table for specifications categories and the content of each category.
Technical specifications
Specification
category
• Processor
Content
• Memory
• Internal drives
• Expansion slots
• Storage controller
• Integrated functions and I/O
connectors
• Network
• System fan
• Power supplies
• Minimal configuration for
debugging
• Operating systems
Technical specifications
Summary of the technical specifications of server. Depending on the model, some features might not be
available, or some specifications might not apply. The latest specifications information is always available at
https://lenovopress.lenovo.com/
Processor
Supports fourth-generation AMD
• Up to two processors with the new LGA 6096 (SP5) socket
• Up to 96 Zen4 cores (192 threads) per socket
• Up to 4 xGMI3 links at up to 32 GT/s
• Thermal Design Power (TDP): up to 400 watts
For a list of supported processors, see
Memory
See
"Memory module installation rules and order" on page 44
setup.
• Slots: 24 dual inline memory module (DIMM) slots (12 channels per processor, 1 DIMM per channel)
• Memory module type: TruDDR5 RDIMM 16 GB (1Rx8), 32 GB (2Rx8), 64 GB (2Rx4 10x4)
• Capacity:
– Minimum: 16 GB (1 x 16 GB RDIMM)
– Maximum: 1.5 TB (24 x 64 GB RDIMM)
• Speed: 4800 MT/s
For a list of supported memory modules, see
Internal drives
• Front drive bays:
– Up to 24 x 2.5-inch hot-swap SAS/SATA/NVMe drives
– Up to 12 x 3.5-inch hot-swap SAS/SATA drives
• Rear drive bays:
– Up to 4 x 2.5-inch hot-swap SAS/SATA drives
• Up to two internal M.2 drives
Mechanical specifications
• Dimension
• Weight
.
®
EPYC
TM
processors, with 5nm process technology.
https://serverproven.lenovo.com/
https://serverproven.lenovo.com/
Environmental specifications
• Acoustical noise emissions
• Environment
• Particulate contamination
.
for detailed information about memory configuration and
.
.
Chapter 1
Introduction
3