Figure 79. Installing a standard heat sink
Figure 80. Installing a performance heat sink
a.
Align the triangular mark and screws on the heat sink with the triangular mark and threaded
posts on the processor socket; then install the heat sink on the processor socket.
b.
Fully tighten all the screws in the installation sequence shown on the heat-sink label.
After you finish
1. Install the system fan cage if you have removed it. See
2. Complete the parts replacement. See
"Install the system fan cage" on page
"Complete the parts replacement" on page
Chapter 5
164.
.
Hardware replacement procedures
160.
121