➐ Adjusting Volume Up & Down; ❽ Turning Off The Projector - NEC NP41 User Manual

➐ Adjusting Volume Up & Down
Sound level from the speaker on the projector can be adjusted.
Another way to adjust volume is to use the menu.
Select [ADJUST] → [BASIC] → [VOLUME] from the menu.
❽ Turning off the Projector
To turn off the projector:
Frst, press the POWER (ON/STAND BY) button on the
projector cabnet or the POWER OFF button on the re-
mote control. The "POWER OFF / ARE YOU SURE ?"
message wll appear.
Secondly, press the ENTER button or press the POW-
ER (ON/STAND BY) or the POWER OFF button agan.
The power ndcator wll glow orange.
Immedately after turnng on the projector and dsplay-
ng an mage, you cannot turn off the projector for 0
seconds.
CAUTION:
Parts of the projector will become heated during operation. Use caution when picking up the projector immedi-
ately after it has been operating.
CAUTION:
Do not unplug the power cable from the wall outlet or projector when the projector is powered on. Doing so can
cause damage to the AC IN connector of the projector and (or) the prong plug of the power cable.
To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch
and a breaker.
NOTE: Do not turn off the projector using the "Direct Power Off" function within 10 seconds of making adjustment or setting
changes and closing the menu. Doing so can cause loss of adjustments and settings.
3. Projectng an Image (Basc Operaton)
LAMP
STATUS
POWER
FOCUS
ON/STAND BY
Power On
LAMP
STATUS
POWER
Steady green light
7
OFF
POWER
MAGNIFY AV-MUTE
MENU
ENTER
L-MOUSE-R
VIDEO COMPUTER
S-VIDEO VIEWER
VOLUME ASPECT
PICTURE
OFF
POWER
MAGNIFY AV-MUTE
AUTO
SELECT
ADJ.
MENU
ENTER
Fan running
LAMP
STATUS
POWER
Blinking Steady green/
orange light
ON
PAGE
UP
DOWN
EXIT
FOCUS
AUTO ADJ.
LAMP MODE
HELP
FREEZE
ON
PAGE
UP
DOWN
EXIT
Standby
LAMP
STATUS
POWER
orange light