Optimizing An Rgb Image Automatically; Adjusting The Image Using Auto Adjust; Adjusting Volume Up & Down - NEC NP3200 User Manual

 Optimizing an RGB Image Automatically

Adjusting the Image Using Auto Adjust

Optimizing an RGB image automatically.
Press the AUTO ADJUST (AUTO ADJ.) button to optimize an RGB image automatically.
This adjustment may be necessary when you connect your computer for the first time.
[Poor picture]
[Normal picture]
NOTE:
• Some signals may take time to display or may not be displayed correctly.
• The Auto Adjust function does not work for component, video, S-video, and DVI digital signals.
• If the Auto Adjust operation cannot optimize the computer signal, try to adjust [HORIZONTAL], [VERTICAL], [CLOCK], and
[PHASE] manually. ( → page 58, 59)
 Adjusting Volume Up & Down
Sound level from the speaker and the AUDIO OUT
jack (Stereo mini) on the projector can be adjusted.
Another way to adjust volume is to use the menu.
Select [ADJUST] → [AUDIO] → [VOLUME] from
the menu.
NOTE:
• Volume control is not available with the  or  button
when an image is enlarged by using the MAGNIFY (+)
button or when the menu is displayed.
Downloaded From projector-manual.com NEC Manuals
3. Projecting an Image (Basic Operation)
30
Increase volume
Decrease volume