Siemens SCALANCE XRH-300 Product Manual page 47

Requirements
For the four-point mounting, you require the following:
• 4 suitable brackets
• 4 recessed head screws (M3 x 6) per mounting bracket for fastening the mounting bracket
to the device
• 2 suitable half-round screws (6 mm diameter) per mounting bracket for fastening the
mounting bracket to the base.
Mounting bracket
For the four-point mounting, you require special mounting brackets. You will find the design
drawings for constructing the mounting brackets in the section "Mounting brackets for use on
ships (Page 98)". You can order four mounting brackets as accessories or manufacture them
yourself according to the design drawings.
The brackets for left and right are identical.
SCALANCE XRH-300/XRM-300
Equipment Manual, 10/2022, C79000-G8976-C546-01
Installing and removing
5.4 Four-point mounting
47