Siemens SITRANS LG240 Operating Instructions Manual page 28

Measurement loop name
Units
Units (2)
Probe length
28
Software addressing
Software addressing is only effective if address 126 or higher is set
on the instrument with the address selection switches.
Here you can assign a suitable measurement loop name. Push the
"OK" key to start the editing. With the "+" key you change the sign and
with the "->" key you jump to the next position.
You can enter names with max. 19 characters. The character set
comprises:
•
Capital letters from A ... Z
•
Numbers from 0 ... 9
•
Special characters + - / _ blanks
In this menu item you select the distance unit and the temperature
unit.
For the distance units you can choose between m, mm and ft and for
the temperature units °C, °F and K.
In this menu item, you select the unit of the Secondary Value (SV2).
It can be selected from the distance units such as for example m, mm
and ft.
In this menu item you can enter the probe length or have the length
determined automatically by the sensor system.
When choosing "Yes", then the probe length will be determined
automatically. When choosing "No", you can enter the probe length
manually.
SITRANS LG240 - Operating Instructions PBD-51041044