Installing The Front Cover; Figure 41: Attaching The Usb Flex Board-To-Board Connector; Figure 42: Attaching The Oled Display Board-To-Board Connector; Figure 43: Attaching The Front Cover - Motorola ST7000 Basic Service Manual

MN002952A01-AH
Chapter 5: Maintenance

Figure 41: Attaching the USB Flex Board-to-Board Connector

5.7.3.6

Installing the Front Cover

Procedure:
1 Attach the OLED display board-to-board connector to the main display board-to-board
connector.

Figure 42: Attaching the OLED Display Board-to-Board Connector

2 Align the bottom edges of the front cover and the main housing. Press down on the top area of
the front cover to attach it to the two catches on the main housing.

Figure 43: Attaching the Front Cover

3 Follow the sequence in
Use a torque screwdriver with 6 IP Torx Plus bit and screw in a clockwise direction.
84
Figure 44: Attaching the Main Screws on page 85 to fasten the screws.