Setting The Language; The "Settings"-Menu - Dometic ML360 CS Operating Instructions Manual

Setting the language

• The factory language setting of the electronics is
ENGLISH. To convert to another language,
proceed as follows :

The "SETTINGS"-Menu

• The parameters contained in the "SETTINGS" menu partially intervene in the function of
the appliance. Access to the SETTINGS menu can therefore be protected by a password.
It is recommended to use this protection to limit access to the parameters.
3
press the MENU-key
select "SETTINGS" 8
w
w
USER PASSWORD :
0XXX 8
SET POINT 8
q
w
SET : X.X °C
SET POINT 2 8
q
w
SET 2 : X.X °C
DATE/TIME 8
q
SET DATE/TIME 8
w
w
HH:MM
dd MMM yy 8
SELECT 12h/24H 8
M
w
12h DISPLAY
ALARMS 8
q
SET LOW ALARM 8
w
LOW ALARM : X.X °C 8
w
SET HIGH ALARM 8
q
HIGH ALARM : X.X °C 8
w
SET LOW ALARM 2 8
q
LOW ALARM 2 : X.X °C 8
w
SET HIGH ALARM 2 8
q
HIGH ALARM 2 : X.X °C 8
w
REMOTE DOOR ALARM 8
q
w
REMOTE DOOR ALARM
ENABLE : 0
24h DISPLAY 8
pq
1 8
pq
3
press the MENU-key.
q
select EXTRA
q
LANGUAGE
q
select your language
In the factory setting this password is set to the value
"0000" so that by pressing the 8 - button you get
directly into the SETTINGS menu.
The temperature set point is the set temperature of the
refrigerator. The set point can be altered
between the prescribed limit values in stages of 0.5 K.
Temperature set point in freezer unit for combined
appliances.
Setting current time and date.
Changing between 12-hour and 24-hour display
The lowest admissible internal temperature of the
refirgerator. If the temperature falls below this value a
temperature alarm is triggered.
The highest admissible internal temperature of the
refrigerator. If the temperature exceeds this value a
temperature alarm is triggered.
The lowest admissible internal temperature of the
freezer unit. If the temperature reaches this value a
temperature alarm is triggered.
The highest admissible internal temperature of the
freezer unit. If the temperature reaches this value a
temperature alarm is triggered.
Activation of the remote alarm on opening door
0 = remote alarm off / 1 = remote alarm on.
7
8
8
8