Using Your Pump; Before Using The Pump; To Begin Pumping - Philips AVENT SCF323 User Manual

7 Use the original USB cable. This appliance does not contain
a power adapter. If you need to use power adapter to
connect to the USB cable, make sure the output voltage is
5 V and the output current is more than or equal to 1 A.
And then connect the power adapter to the power socket.

Using your pump

Before using the pump

Wash your hands thoroughly, and make sure your breasts are clean. Gently squeeze a
•
little milk from each nipple to make sure that milk ducts are not blocked.
Make sure you follow the steps in "Cleaning and sterilising" and "Assembling" chapters to
•
clean, sterilise, and assemble the breast pump.
Relax in a comfortable chair, leaning slightly forward (use cushions to support your
•
back). Make sure that you have a glass of water nearby.

To begin pumping

1 Press the assembled pump bodies against your breasts.
Make sure that your nipples are centered, so that the
massage cushion creates an airtight seal. Make sure that no
air escapes; otherwise there is no suction.
2 Press the power button ( ) to switch on your pump.
» The display panel lights up for 1 second. The breast
pump automatically starts up with the lowest level to
stimulate, and you will feel suction on your breast.
The stimulation indicator lights up. The appliance has
the memory function to remember the levels for both
stimulation and expression mode in your latest usage.
2
1
English 7