Download Print this page
Coleman DURANGO 2000000143 Installation Manual

Coleman DURANGO 2000000143 Installation Manual

15’ x 10’ tent
Hide thumbs Also See for DURANGO 2000000143:

Advertisement

Quick Links

Before you begin
Read all instructions before set up.
• Select a level campsite clear of rocks, branches, and other hard
or sharp objects, to install your tent.
WARNING: Keep clear of overhead power lines.
• Do not set up your tent under trees.
• For best results in windy conditions, position end of tent into
the wind.
• Enlist the help of at least one other person to assist you when
it is time to assemble the tent.
Parts and Components
Description
Main Poles, Black (2)
Side Pole, Gray (1)
Roof Ridge Pole, Black (1)
Rainfly Pole, Black (1)
Rainfly
To Set Up Tent
1. Unfold tent and spread out on a clean, level surface with the
door facing the desired direction. Unzip door.
2. Stretch out corners and sides of tent. Secure with stakes
driven in at an angle to better anchor the tent. (Fig. 1 & 2)
Note: Staking the corners and sides will make it easier to
raise and tear-down the tent.
3. Assemble roof ridge pole (3-section, black, shock-corded
pole) and insert through sleeve in center of tent.
4. Place one end of roof ridge pole in brass grommet. Carefully
apply pressure on pole to allow other end of pole to bow and
be inserted into other brass grommet. (Fig. 3 & 4)
5. Assemble the 2 long, black shock-corded poles and insert
through sleeves in top of tent forming an "X" as shown.
(Fig. 5)
DURANGO
TM
Part Number
9163-1051
9163-1061
9163-1071
9163-1081
9163-1091
Fig. 1
Fig. 4
Fig. 3
Fig. 5
15' X 10'
MODEL 2000000143
6. Assemble gray, shock-corded, side pole and insert through
sleeve in front of tent as shown. (Fig. 6)
7. Insert one end of each black pole
into pins located on the ring in
center location at the back of the
tent. (Fig. 7)
8. Insert other end of black poles
into pins at front corners of tent;
and end of gray pole into pins on
sides of tent to form arches as
shown. (Fig. 8)
Gray
Pole
Fig. 2
First
Black Pole
9. Attach frame clips along tent seams to gray side pole and
both black poles. (Fig. 9 & 10)
To Attach Rainfly
1. Drape rainfly over tent. Make sure end with logo is centered
over the door and the rainfly seams are centered over the
gray and black
poles. (Fig. 11)
(continued on
other side)
Fig. 8
Fig. 9
Fig. 6
Fig. 7
Gray
Pole
Second
Black Pole
Fig. 10
Fig. 11

Advertisement

loading

Summary of Contents for Coleman DURANGO 2000000143

  • Page 1 DURANGO Before you begin Read all instructions before set up. • Select a level campsite clear of rocks, branches, and other hard or sharp objects, to install your tent. WARNING: Keep clear of overhead power lines. • Do not set up your tent under trees. •...
  • Page 2 The application of any foreign substance to the tent fabric may render the flame-resistant properties ineffective. The Coleman Company, Inc. • 3600 N. Hydraulic • Wichita, Kansas 67219 Fig. 20 Coleman ®...