Schematic Setup Of A Gnss Repeater System - VDO AS47-G CS Installation Manual

5. Schematic setup of a GNSS repeater system

5. Schematic setup of a GNSS
repeater system
Outdoor antenna Transmitting unit
Please note that the cable length and cable type are adapted to the respective system
and therefore can not be extended or shortened. If you require a larger cable length
between the outdoor and indoor antenna, please contact your dealer.
The minimum required signal for the operation of a modern GPS receiver is approx. - 155 dBm (hot start).
Average signal level on the earth approx. - 125 dBm, depending on the number of available satellites.
99
GNSS Repeater Buch 1.indb 99 18.01.2019 16:06:15