Introduction; Safety Measures - VDO AS47-G CS Installation Manual

1. Introduction

1. Introduction
The AS47-G CS is a GNSS repeater kit for GPS L1 and Glonass G1 with two antennas for real-time signal
transmission in buildings. The system consists of a high-gain GNSS antenna for outdoor use, a high-precision
amplifier unit with a helix GNSS transmission element and an integrated electronic controller module. This
allows any number of devices to receive the GNSS signal in buildings at a distance of 7-8 m to the transmitting
unit.
Please read this manual carefully before use, as it contains a number of important instructions for operating the
device and enables you to fully exploit the possibilities of your system.

2. Safety Measures

This system has been produced and tested according to the accompanying EU Certificate of Conformity and
left the factory in perfect condition. To ensure safe operation, the user or user shall observe all instructions and
warnings.
Please note the operating instructions! This note has a very high importance.
Applied Symbols in the description:
Please follow the operating instructions! This note is of very high importance.
93
GNSS Repeater Buch 1.indb 93 18.01.2019 16:06:14