Equipment Required
Procedure: Input 1 to 18 GHz (1 to 2.9 GHz, 2.68 to 18 GHz)
3-16 System Setup and Functional Tests
correction factors are turned o in the analyzer. Video averaging is
activated and the displayed average noise is measured over a selected
frequency range.
Recommended Test Equipment and Accessories
Equipment and
Accessories
Adapter
Adapter
Termination, 50
Connector: APC 3.5 (m)
1. Connect equipment as shown in Figure 3-7.
Figure 3-7. DANL Measurement Setup, 1 to 18 GHz
2. Press
and verify that
4
5
MODE
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
press
EMC ANALYZER .
Table 3-3.
Critical Specications for
Equipment Substitution
APC 3.5 (f) to APC 3.5 (f)
Type N (f) to APC 3.5 (f)
Frequency Range:
1 to 26.5 GHz
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
EMC ANALYZER is underlined. If not,
Recommended
Model
5061-5311
1250-1745
HP 909D
Option 12