To Start/Stop Operation Mode And To Set The Temperature - Daikin FVXM25A3V1B User Reference Manual

6.3.1 To start/stop operation mode and to set the temperature

CVXM-A, FVXM-A, CVXM-A9, FVXM-A9, FVXTM-A
Split system air conditioners
4P625990-1D – 2022.09
Setting
Automatic
Drying
Heating
Cooling
Fan
Additional info:
▪ Outside temperature. The system's cooling or heating effect decreases when the
outside temperature is too high or too low.
▪ Defrost operation. During heating operation, frost might occur on the outdoor
unit and decrease the heating capacity. In that case, the system automatically
switches to defrosting operation to remove the frost. During defrosting
operation, hot air is NOT blown from the indoor unit.
1 Press one or more times to select the operation mode.
Result: The mode will be set as follows:
2 Press to start operation.
Result: is displayed on the LCD. The Daikin eye indication lamp changes
colour according to the operation. See
4
lamp" [ 14].
3 Press or one or more times to lower or raise the temperature.
Cooling operation Heating operation Automatic
18~32°C 10~30°C
Note: When using drying or fan only mode, you cannot adjust the temperature.
The system cools down or heats up a room to
the temperature setpoint. It automatically
switches between cooling and heating if
necessary.
The system decreases the humidity in a room.
The system heats up a room to the temperature
setpoint.
The system cools down a room to the
temperature setpoint.
The system only controls the airflow (airflow
rate and airflow direction).
The system does NOT control the temperature.
: Unit is operating
: Operation mode = Automatic
: Operation mode = Drying
: Operation mode = Cooling
: Operation mode = Heating
: Operation mode = Fan only
: Shows the set temperature.
operation
18~30°C
6 Operation
|
Description
"4.1.1 Daikin eye indication
Drying or Fan only
operation
—
User reference guide
23