To reset the connection setting to the factory default
To turn off the wireless LAN connection
6.14 About Multi system
CVXM-A, FVXM-A, CVXM-A9, FVXM-A9, FVXTM-A
Split system air conditioners
4P625990-1D – 2022.09
Reset the connection setting to the factory default in case you want to:
▪
disconnect the wireless LAN and the communication device (e.g. router) or smart
device.
▪
repeat the setting if the connection was unsuccessful.
1 On the home screen, press
operating.
Result: SP appears on the display. is blinking.
2 Press
twice to change the SP menu to .
(5 sec.)
3 Hold
for at least 2 seconds to confirm the selection.
Result: is blinking. The setting is reset to the factory default.
4 Press
to exit the menu.
Result: The display will return to the home screen.
If you want to turn off the wireless connection function:
1 On the home screen, press
operating.
Result: SP appears on the display. is blinking.
2 Press
change the SP menu to
(5 sec.)
3 Hold
for at least 2 seconds to confirm the selection.
Result:
is blinking. Communication is OFF.
4 Press
to exit the menu.
Result: The display will return to the home screen.
In Multi system, 1 outdoor unit is connected to multiple indoor units. Example:
for at least 5 seconds while the unit is not
2×
for at least 5 seconds while the unit is not
.
1×
6
Operation
|
User reference guide
41