僅 Rear Side Marker (Led Type) Bulb Replacement; 僅 Rear Turn Signal Lamp (Led Type) Bulb Replacement - Kia Stinger 2023 Owner's Manual

Maintenance
OCK070055
6. Disconnect the rear combination lamp
connector.
7. Remove the socket from the assembly
by turning the socket counterclock-
wise until the tabs on the socket align
with the slots on the assembly.
OCK070056
8. Remove the bulb from the socket by
pressing it in and rotating it counter-
clockwise until the tabs on the bulb
align with the slots in the socket. Pull
the bulb out of the socket.
9. Insert a new bulb by inserting it into
the socket and rotating it until it locks
into place.
10.Install the socket in the assembly by
aligning the tabs on the socket with
the slots in the assembly. Push the
socket into the assembly and turn the
socket clockwise.
11.Install the rear combination lamp
assembly to the body of the vehicle.
12.Install the service cover.
Rear side marker (LED type) bulb
replacement
OCK070126N
If the rear side marker (LED) (1) does not
operate, have the vehicle checked by an
authorized Kia dealer.
The LED lamps cannot be replaced as a
single component because they are part
of an integrated unit. The LED lamps
have to be replaced with the unit.
A skilled technician should check or
repair the rear side marker (LED), for it
may damage related parts of the vehicle.
Rear turn signal lamp (LED type)
bulb replacement
OCK070126
Light bulbs
7
7 65