僅 Light Bulb Position (Front); 僅 Light Bulb Position (Rear); 僅 Light Bulb Position (Side) - Kia Stinger 2023 Owner's Manual

Maintenance
NOTICE
You can find moisture inside the lens of
lamps after a car wash or driving in the
rain. It is a natural event caused by the
temperature difference between the
inside and the outside of the lamp and
does not mean a problem with its func-
tions. The moisture inside the lamp
would disappear if you drive the vehicle
with the headlamp turned on, however,
the level at which the moisture is
removed may differ depending on the
size/location/condition of the lamp. If the
moisture continues to stay inside the
lamp, we recommend that you have the
vehicle checked by an authorized Kia
dealer.
If you don't have the necessary tools, the
correct bulbs and the expertise, consult
an authorized Kia dealer. In many cases,
it is difficult to replace vehicle light bulbs
because other parts of the vehicle must
be removed before you can get to the
bulb. This is especially true if you have to
remove the headlamp assembly to get
to the bulb(s).
Removing/installing the headlamp
assembly can result in damage to the
vehicle.
If non-genuine parts or substandard
bulbs are used, it may lead to blowing a
fuse or other wiring damages.
Do not install extra lamps or LEDs to the
vehicle. If additional lights are installed, it
may lead to lamp malfunctions and flick-
ering. Additionally, the fuse box and
other wiring may be damaged.
7 60
Light bulb position (Front)
Head lamp - Type A
OCK070123N
Head lamp - Type B
OCK070048N
1. Headlamp (High) (LED type)
2. Headlamp (Low) (LED type)
3. Headlamp (High assist) (LED type)
4. Front turn signal lamp (LED type)
5. Day time running lamp /Position lamp
(LED type)
6. Side marker (LED type)
7. Headlamp (Low/High) (LED type)
8. Headlamp (Low/High assist) (LED
type)
Light bulbs