Saeco Royal BLACK Operation And Maintenance Manual page 56

English
After placing the tablet in the brew group, press the
"OK" button to confirm.
PUT BACK THE
GROUP
IN THE MACHINE
OK
Put the brew group back into the machine and press
the "OK" button to confirm.
PLACE A CONTAINER
UNDER ALL THE
SPOUTS
OK
Place a container under the spouts (hot water and
coffee) and press the "OK" button to confirm.
Brew Group Clean
The machine completes the cycle automatically.
At the end of the cycle,
after performing the rinse
cycle, the machine goes
back to
operating mode.
56
Exit
its normal
It is recommended
remove the group and wash
it under fresh running water.
Ensure that the brew group
is completely dry before
putting it back into the
machine.
10.2.6 Brew group lubrication
Lubricate the brew group after approximately 500 cups
of coffee or once a month. The grease for lubricating
the coffee unit and the relative accessories can be
purchased from your local dealer or the authorised
support centres.
To see how many coffees
have been dispensed, see
the "PRODUCTS" menu
in the "STATISTICS" menu
of the tech. menu (see
section "Description
messages
programming menu").
Before lubricating the brew group, clean it under
running water as described in the "Brew Group
Cleaning" chapter.
Lubricate the brew group guides using Saeco grease only.
Apply the grease evenly on both side guides.
to
of
in the