Saeco Royal BLACK Operation And Maintenance Manual page 54

English
Wash the brew group with lukewarm water; carefully
wash the upper filter. Before placing the brew group in
its seat, ensure that there is no water left in the
brewing chamber.
Make sure that the brew group is in the off position.
The two reference marks must match.
If they do not match, proceed as described below:
Ensure that the lever is in contact with the brew group
base.
Make sure that the hook which locks the brew group is
in the correct position. firmly press the "PRESS"
button to check its position.
54
Insert the brew group into its seat again until it locks
into place WITHOUT pressing the "PRESS" button.
Close the service door.
Ensure that the brew group
is completely dry before
putting it back into the
machine.
10.2.5 Brew Group Cleaning with
the "Coffee Oil Remover"
Besides weekly cleaning, we recommend performing a
cleaning cycle with "Coffee Oil Remover" after
approximately 500 cups of coffee or once a month.
This operation completes the maintenance process for
the brew group. The "Degreasing tablets" for cleaning
the coffee unit and the maintenance products can be
purchased from your local dealer or the authorised
support centres.
The "Coffee Oil Remover"
system has no descaling
properties. For descaling,
use the Saeco descaling
solution and follow the
procedure
the "Descaling" chapter.
The wash cycle cannot be interrupted. Do not leave
the machine unattended during this operation.
described in