Siemens CIM Operating Manual page 59

Bind data
1. Click "Add Row" to add a new row.
2. Click the "Event Type" drop-down list to choose and event.
Note
The event "Greater than" is triggered on the rising edge, while "Less than" is triggered on
the falling edge.
3. Configure the event, it can be change of a variable (Page 55) or receive Messages (Page 56)
from a contact (Page 54).
If there is no variable or message meet your requirement in the list, you can add variable
or message on top of the list.
CIM
Operating Manual, 11/2022, A5E51250518-AC
Event
1 Changes from 1 to 0
2 Changes from 0 to 1
3 Value Changed
4 Greater than
5 Equals
6 Less than
7 Receives message
No event triggered.
Event "Greater than 5" is triggered.
Event "Equals 5" is triggered.
Event "Less than 5" is triggered.
Event Source restriction
source
Variable Permitted data type: bool
Permitted data type: all UDM permitted data type ex-
cept bool.
Permitted data type: all UDM permitted data type ex-
cept bool.
Note: The type and range of the reference value
should be the same as event source variable.
Message Any message
Web-based configuration
5.4 Web pages
59