Siemens CIM Operating Manual page 57

3. Toggle on "With parameter" as you need.
Note
If you toggled on "with parameter", the variable value of the bind event will be added in
the message CIM sends. If the parameter is in hexadecimal, 0x is also added before the
value.
• Message content with parameter: message text + value of the parameter.
• Message content with parameter in hexadecimal: message text + 0x+value of the
For the allowed parameters, refer RESTful API (Page 72).
4. Repeat the steps 1-3 to add all messages you need.
Note
If the message is referred by an event or an action, the message cannot be changed or
deleted.
Change a message
Click
Delete a message
Click
CIM
Operating Manual, 11/2022, A5E51250518-AC
parameter.
for you message you want to change, then enter the new name and message text.
for the message you want to delete.
Web-based configuration
5.4 Web pages
57