Table of Contents
Advertisement
Maintenance
Greasing the Sulky
Service Interval: Before each use or daily—Inspect
the grease fittings.
Every 40 hours—Grease the platform (grease
immediately after each washing).
Grease type: General-purpose grease
1.
Park the machine on a level surface, disengage
the PTO, and engage the parking brake.
2.
Shut off the engine and remove the key.
3.
Clean the grease fittings with a rag.
Note:
Make sure to scrape any paint off the
front of the fitting(s).
4.
Connect a grease gun to the fitting.
5.
Pump grease into the fittings until grease begins
to ooze out of the bearings.
6.
Wipe up any excess grease.
Figure 8
g295121
8
Advertisement
Table of Contents
