Safety - Toro 44401 Operator's Manual

Safety

•
Ensure that the sulky is properly attached to the
machine and is in good working order prior to use.
•
Do not try to stabilize the machine by putting
your foot on the ground. If you lose control of the
machine, step off the sulky platform and away
from the machine.
•
Do not place your feet under the sulky.
•
While using the sulky, do not move the machine
unless you are standing with both feet on the
platform and your hands are holding on to the
reference bars.
•
Do not operate the machine in reverse while
standing on the platform. Step off the platform and
allow the sulky to rotate 180 degrees around while
moving the machine in reverse.
•
Look behind and down before backing up to
ensure that the path is clear.
•
Allow only the machine operator on the platform.
•
Do not allow untrained operators to use the sulky.
•
Dismount and latch the sulky in the transport
position when loading and unloading the machine
and operating on hillsides.
•
Slow down before turning. Sharp turns on any
terrain may cause loss of control.
•
Do not use the sulky on rough and uneven terrain.
•
Ensure that you operate the sulky in areas where
there are no obstacles nearby. Failure to maintain
adequate distance from trees, walls, and other
barriers may result in injury as the sulky backs
up or turns during operation if the operator is not
attentive to the surroundings. Operate the sulky
only in areas where there is sufficient clearance
for you to safely maneuver the sulky.
•
Before performing any service, repairs,
maintenance, or adjustments, do the following:
– Park the machine on a level surface.
– Disengage the power takeoff.
– Engage the parking brake.
– Shut off the engine and remove the key.
•
Keep nuts and bolts tight. Keep equipment clean
and in good condition.
•
Use only genuine replacement parts.
•
Do not modify the sulky or use it on non-approved
machines.
3