Lexus RX200T 2017 Owner's Manual page 73

Child restraint system suitability table
■
(Installed using i-Size [Child restraint system conforms with ECE R129])
If your child restraint system is of "i-Size" category, you can install it on the
positions mentioned by i-U in the table below. Child restraint system category
can be found in the child restraint system manual.
i-Size child
restraint systems
Key of letters inserted in the above table:
X: Not suitable for use with i-Size child restraint systems.
i-U: Suitable for i-Size "universal" child restraint systems forward and rearward
facing.
*
: If the head restraint interferes with your child restraint system, and the head restraint
can be removed, remove the head restraint. Otherwise, put the head restraint in the
upper most position.
When securing some types of child restraint systems in second row seats, it may
not be possible to properly use the seat belts in positions next to the child
restraint without interfering with it or affecting seat belt effectiveness. Be sure
your seat belt fits snugly across your shoulder and low on your hips. If it does not,
or if it interferes with the child restraint, move to a different position. Failure to do
so may result in death or serious injury.
When installing a child restraint in the rear seats, adjust the front seat so that it
does not interfere with the child or child restraint system.
Seating position
Front seat
Passenger seat
X
1-2. Child safety
Rear seat
Outboard Center
*
i-U
73
1
X