Using The T 737 - Setup Menu; Setup Menu; Source Setup; Source Setup (Normal View) - NAD T737 Owner's Manual

OPERATION
USING THE T 737 – SETUP MENU

SETUP MENU

The Setup Menu allows one to customize the operation of the T 737 to the
ancillary equipment used in one's specific AV system. Unless your system
exactly matches the factory defaults, you will need to use the Setup Menu
to configure the settings of your T 737.
At Setup Menu, the following are configurable – Source Setup, Speaker
Setup, Trigger Setup, Listening Mode Setup, Display Setup and A/V Presets
Setup.
To navigate through these Setup Menu options and their sub-menu
selections, please refer to above section about "DISPLAY THE OSD" and
"NAVIGATING THE OSD AND MAKING CHANGES".

SOURCE SETUP

From Source Setup menu, pressing [
menu wherein you could adjust, allocate or change the settings of the
following – Source Setup (Normal View), Source Setup (Table View) and
iPod Setup.

SOURCE SETUP (NORMAL VIEW)

The Source Setup (Normal View) makes it possible to set, allocate or change
the following settings.
18
] will direct you to the Source Setup
SOURCE
The T 737 is equipped with 9 configurable sources (Source 1-8 and Source T).
The settings for each Source are dependent on the configurations set forth in
the parameters for that particular Source window.
While at "Source" line item, use [
NOTE
Source 4 is defaulted to iPod. For Source 4 to be changed and assigned
to other inputs, go to "iPod Setup" menu under the "Source Setup" menu.
At iPod Setup menu, set "Enabled" to "No" – you can now assign Source 4
to other inputs or settings as desired.
ENABLE
One can enable/disable a Source via this option. This is particularly useful
if only few Sources are used and one directly selects the Source from the
front panel, bypassing unused sources.
To enable or disable a particular Source, scroll to "Enable", press [
then [ ] to select "Yes" or "No".
NAME
A new Name maybe assigned to a Source label. For example, if your DVD player
is attached to "Source 1", it is possible to rename "Source 1" to "DVD".
In order to rename the Source label, scroll to "Name", press [ ] and then [
to pick and select through the alphanumeric selections.
Press [ ] to move to the next character and at the same time save the
changes done on the current character. The name can be as long as eight
characters.
The new Name will be shown in the VFD as well as on the OSD.
ANALOG AUDIO
The T 737 has eight analog audio inputs including 7.1 input. These analog
inputs - Audio 1, Audio 2, Audio 3, Audio 4, Audio 5, Audio 6, Audio Front
and 7.1 Input can be variably assigned to each Source.
Scroll to "Analog Audio" and press [
to select and assign an analog audio input to the particular Source. If "Off"
is selected, no incoming analog audio signal is selected by the particular
Source.
NOTE
An incoming digital signal present at the assigned digital input will always
take precedence over the assigned analog audio input, even if both are
present. To maintain the analog audio input for the particular Source, select
"Off" at the "Digital Audio" setting of the same "Source" menu.
GAIN
Gain adjustment allows all sources to playback at the same volume level.
In this way, so you don't need to adjust the volume level every time a
new source is selected. It is generally preferable to reduce the level of the
loudest source rather than making louder the softer sources.
Scroll to "Gain", press [ ] and then [
from -12 to +12.
] keys to toggle through the Sources.
] and
] and then [ ] to
] to step through the desired level
]