System Info; Setup Menu - NAD T 777 Owner's Manual

SYSTEM INFO

"System Info" displays information about current firmware versions of MCU,
DSP, Video and BluOS/ OSD as well the unit's serial number and IP address.
The System Information shown above is for reference only.
CHECK FOR UPGRADE
Your T 777 is updated to latest firmware versions if "Check for Upgrade" is
shown.
SYSTEM INFO (UPGRADE AVAILABLE)
Your T 777 needs to be upgraded if the "System Info" item in the Main Menu
changes to "System Info (Upgrade Available).
START UPGRADE
With your T 777 connected to internet, select "Start Upgrade" and Internet
Update will proceed automatically.
Refer also to enclosed INTERNET UPDATE GUIDELINES for further guidelines.
USING THE T 777 – MAIN MENU

SETUP MENU

The Setup Menu allows one to customize the operation of the T 777 to the ancillary
equipment used in one' s specific AV system. Unless your system exactly matches
the factory defaults as shown in the accompanying Quick Start Guide, you will need
to use the setup menu to configure the inputs of the T 777.
At Setup Menu, the following are configurable
•
Control Setup •
• Speaker Setup •
•
Amplifier Setup •
• Listening Mode Setup •
•
A/V Presets •
• Select Language
To access and navigate through Setup Menu and its sub-menu selections,
please refer to and follow the directions stated in the sections 'Display the
OSD' and 'Navigating the OSD and Making Changes. '
OPERATION
Source Setup
Zone Setup
Trigger Setup
Front Panel Display Setup
BluOS Setup
13