Dab Reset; Information Settings - NAD T737 Owner's Manual

DAB RESET

The "DAB Reset" option enables the re-initializing of the NAD DAB Adaptor
DB1 by going to Full Scan mode.
1 While listening to a DAB broadcast, press [MENU] button and then [
to select "DAB Reset". Press [ENTER].
2 The T 737 will initiate "DAB Initialize" and immediately go on to "Full
Scan" mode thereby enabling the T 737 to re-scan again the full range
of available DAB broadcasts.
IMPORTANT NOTICE
When "DAB Reset" option is selected, all stored DAB presets will be
erased.

INFORMATION SETTINGS

While listening to a DAB broadcast, the type of information displayed in
the lower line of the VFD can be varied. Toggle the [INFO] button to step
through the following display options:
]
Audio Signal information
Channel and Frequency
Software version
DLS
Dynamic Label Segment (DLS) is the scrolling text supplied by the
broadcasting station. It may contain information on music titles or details
regarding the program or station.
PROGRAM TYPE
This is a description of the type of broadcast supplied by the station, such
as Pop, Rock, Drama and the likes.
STATION NAME
The name or identification of the DAB broadcast station is shown.
TIME AND DATE
The current time and date as supplied by the DAB station are displayed.
AUDIO SIGNAL INFORMATION
Displays the bit rate and audio type (stereo, mono or joint stereo)
as transmitted by the DAB broadcast provider. These are set by the
broadcaster to suit the type and quality of material being transmitted.
CHANNEL AND FREQUENCY
The channel and frequency of the currently tuned DAB broadcast are
displayed.
SIGNAL QUALITY
This displays the digital error rate (0 to 99) of the currently tuned channel -
the lower the figure, the better the quality of the received broadcast.
SOFTWARE VERSION
Show the version number of the installed software.
OPERATION
LISTENING TO DAB RADIO
DLS
Program Type
Station Name
Time and Date
Signal Q
31