Page 1
HMTB80 QUICK ASSEMBLY GUIDE 1. Assemble the armrest frame to the armrest seat as shown in the figure and fasten it with bolts. armrest frame 2 hex bolts M10×65 2 pieces of flat washers 10 2 pieces of spring pads 10...
Page 2
3. Place the walking wheel assembly and the walking wheel tension spring between the power supports and use two B-type, two-piece B-type pin shafts 10×45, 4 large washers 10×2.5, and two R pins φ2×9×38, fixed as shown in the figure. Power support 4 large washers X 2.5 2 pieces of type B pin 10×45...
Page 3
5. Assemble the belt guard to the bottom of the belt guard and fix it with M5X12. 4 pieces of hexagon flange bolts M5×12 Belt guard bottom plate Belt guard Assemble the cutter: As shown in the figure, install the blade on the main and auxiliary cutter barrels with bolts, and finally connect the main and auxiliary cutter barrel pins with the R pin;...
Page 4
Left cutter assembly Right cutter assembly...