Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Hyundai HYT150
Summary of Contents for Hyundai HYT150
- Page 1 PETROL ROTAVATOR / TILLER HYT150 Instruction Manual...
- Page 2 We would be delighted if you left us positive feedback! Thank you for purchasing this product. This manual has been produced by Hyundai Power Products and should be kept with the product. Please read and understand these instructions before you use your product. Failure to do this may result in personal injury or damage to the product.
-
Page 3: Table Of Contents
Tilling Depth Adjustment........19 Declaration Of Conformity...........39 Basic Operation............20 Clutch Operation..........20 Front Wheel.............20 Tips For Use............20 Starting Procedure............21 Before Each Use..........21 Starting The Engine..........21 IMPORTANT: DON’T FORGET TO REGISTER YOUR EXTENDED 3 YEAR HYUNDAI WARRANTY WITHIN 30 DAYS OF PURCHASE. https://www.hyundaipowerproducts/warranty... -
Page 4: Features
Features Engine speed Emergency stop lever adjustment Safety clutch lever Hand grip Handle bar Recoil starter cord Fuel tank cap Air filter Depth bar Exhaust Front handle Mud fender Blade assembly Front wheel Gear box This diagram is illustrative only and is intended to help you better understand the operating instructions. -
Page 5: Symbols On The Machine
Symbols On The Machine CAUTION! CAUTION! HOT SURFACE Handle carefully. Hot temperature, do not touch. INSTRUCTION MANUAL WARNING Read and understand operator’s Keep feet away from sharp rotating manual before using the machine. blades. Failure to follow instructions could result in death or serious injury. CE SYMBOL DO NOT SMOKE This product complies with the... -
Page 6: General Safety
General Safety WARNING : READ THE INSTRUCTION BOOKLET THOROUGHLY BEFORE USING THE MACHINE. Keep for future reference and pass it on if the machine is loaned or sold to another user. Personal Safety Understand Your Machine • WARNING! You must read these •... -
Page 7: Inspect Your Machine
General Safety • Always keep hands and feet away from all • Never operate the machine when it is in pinch points. need of repair or is in poor mechanical condition. Replace damaged, missing, or • Do not touch parts that might be hot failed parts before using it. -
Page 8: Engine Safety
General Safety • Keep the machine in good operating • Never pick up or carry the machine while the condition. Operating a machine in poor or engine is running. questionable condition could result in serious • Stop the engine whenever you leave the injury. -
Page 9: During Use
General Safety • Find and locate all fixed objects in the • Do not operate the machine in confined ground, such as sprinkler systems, poles, areas where there may be a risk of crushing water valves, bases for washing lines etc the operator between the machine and Make sure that you check for hidden another object. -
Page 10: Carbon Monoxide
General Safety Carbon Monoxide by leaving the affected area or by opening doors and windows. If safe and practical to do so make sure that the machine is turned off. DANGER DO NOT enter a room you suspect of having carbon monoxide present –... - Page 11 General Safety have contained fuel. • When refilling or draining the fuel tank, use an approved fuel storage container while in • ALWAYS keep the work area tidy. a clean, well-ventilated outdoor area. While adding fuel or operating the unit, do not •...
-
Page 12: Electrical Safety
General Safety Electrical Safety (Where You must advise the medical staff of the type of acid. Applicable) • Lead/acid battery = dilute sulphuric acid. DANGER! • Nickel/cadmium = potassium hydroxide ELECTRICITY CAN KILL – NEVER WORK alkali electrolyte. ON LIVE/ENERGISED EQUIPMENT. •... -
Page 13: Noise
Note The HYT150 is a petrol rotavavator/ tiller from the following to reduce the risk of white finger Hyundai. The HYT150 has a tilling width of and carpal tunnel syndrome;... -
Page 14: Personal Protective Equipment
General Safety Personal Protective Equipment Appropriate Personal Protective Equipment (PPE), MUST be worn at all times when operating or repairing the machine. HAND PROTECTION MUST BE WORN Protective electrically non-conductive gloves are highly recommended when working. FOOT PROTECTION MUST BE WORN Non-skid heavy duty footwear are highly recommended when working. -
Page 15: Getting Started
WARNING! Unboxing and assembling as a quick reference for operating your the machine should be done on a flat, stable HYUNDAI machine. We always advise reading surface with enough room. Disposal of the the manual in full before operation. packaging should be done in accordance with the local regulations in force. -
Page 16: Assembly
Assembly STEP 3 You must read the assembly safety on the previous page before you begin. Attaching The Handles STEP 1 Insert the bolts through the upper holes. Tighten all bolts. Attaching The Cable Clips STEP 1 Slide the handle bracket (25) onto the ends of the handles. -
Page 17: Attaching The Drag Bar
Assembly Attaching The Depth Bar STEP 2 STEP 1 Slide the outer blade (24.3) into the outer blade hole, insert pin and secure with another R-type locking pin. Attach the blade to the Attach the depth bar (18) to the depth bar opposite side of the rotavator shaft using the holder, choose a suitable height and then lock same method. -
Page 18: Preparing The Tiller
Preparing The Tiller CAUTION - Do not make any adjustment Fuel to the machine without stopping the engine first. Use straight unleaded petrol. Never use an oil/ petrol mixture or dirty petrol. Avoid dirt, dust Engine Oil or water from getting into the fuel tank. CAUTION! Running the engine with low oil level will cause CAUTION! Do not overfill the fuel tank... -
Page 19: Air Filter
Preparing The Tiller Air Filter Handlebar Height Adjustment CAUTION! Before adjusting the handlebar, STEP 1 place the tiller on firm level ground. Check air filter (25) for dust, dirt or STEP 1 obstruction of elements. To adjust the tiller handle height, loosen the adjuster bolts (16) on either side, select the appropriate height and tighten the bolt. -
Page 20: Basic Operation
Basic Operation Clutch Operation Front Wheel STEP 1 STEP 1 The clutch engages and disengages the When the tiller is in location ready to be used, power from the engine to the transmission. lift the front wheel to the raisen location. The clutch lever (1) has a safety clip (1.1) which needs to be released before the clutch lever can be depressed. -
Page 21: Starting Procedure
Starting Procedure CAUTION - For OUTDOOR use ONLY. STEP 2 Petrol machines produce carbon monoxide – a poisonous, colourless and odourless gas that Press the primer bulb (9) three times to prime can cause serious injury or death. Petrol is the motor. -
Page 22: Stopping Procedure
Stopping Procedure CAUTION - The engine and exhaust will remain hot for a some time after use. Ensure the engine and exhaust has cooled before carrying out any maintenance, re-fuelling or storage. After Each Use • Examine the machine for damage. •... -
Page 23: Troubleshooting
Troubleshooting ! CAUTION! For your own safety, switch the engine off before any maintenance. NOTE - Where necessary, all corrective actions should be carried out by a suitably qualified person. Problem Possible Cause Possible Solution Engine will not 1. Not enough fuel 1. -
Page 24: Specifications
Specifications NOTE - All machines are tested and inspected so there may be some residual oil left in the machine so please fill with caution. Model HYT150 Hyundai IC150V 4-stroke OHV Engine Type Engine Size 150cc Rated power 2.7kW Engine Speed... -
Page 25: Maintenance And Care
Maintenance & Care Safety 6. On a regular basis, check that the screws are properly tightened. IMPORTANT - Routine and accurate 7. Be very careful during adjustment of the maintenance is essential for maintaining machine to prevent entrapment of the fingers original machine safety and performance between moving parts and fixed parts of the levels. -
Page 26: Routine Maintenance
Maintenance & Care Routine Maintenance Drain The Oil NOTE - Please dispose used motor oil in a 1. You must remove grass and mud from the manner that is compatible with the machine to prevent it from drying. This will environment. -
Page 27: Draining Gearbox Oil
Maintenance & Care Air Filter Service STEP 2 Use gearbox oil SAE 85W-90. Carefully pour WARNING! in gearbox oil (approx.200ml). Avoid spilling. Never use petrol or low flash point solvents to clean the air cleaner element. This could result STEP 3 in a fire or explosion. -
Page 28: Spark Plug Service
Maintenance & Care Spark Plug Service STEP 5 When mounting a new spark plug, you should Recommended spark plug: BPR5ES (NGK) / screw 1/2 more thread with the wrench after F7RTC (LG). the washer is compressed. If you are To ensure proper engine operation, the spark mounting an old one, you should only screw plug must be properly gapped and free of 1/8-1/4 more thread. -
Page 29: Maintenance Schedule
Maintenance & Care Maintenance Schedule Item Every use Every 3 Every 6 Every 12 Every 24 months or months or months or months or 15 hours 50 hours 100 hours 300 hours Air filter Check Clean Spark plug Check / Adjust Replace Carburetor Clean... -
Page 30: Cleaning
Maintenance & Care Cleaning Storage CAUTION - DO NOT use a hose pipe or CAUTION - When storing the machine, pressure washer to clean the engine. Water make sure it has been cleaned as in the can damage the engine or contaminate the previous section. -
Page 31: Transportation & Handling
Maintenance & Care Transporation & Handling STEP 2 Pull the starter grip until resistance is felt. 1. When transporting the tiller, turn the fuel Continue pulling until the notch on the starter valve OFF and keep the tiller level to prevent puller aligns with the hole on the recoil starter. -
Page 32: Environmental Protection
Maintenance & Care Environmental Protection Under NO circumstances must any fuel or oil be put down any drains. 1. Environmental protection should be a Certain products contain WEEE waste which priority of considerable importance when should not be disposed of in your domestic using the machine, for the benefit of both waste. -
Page 33: Notes
Notes... - Page 34 Notes...
- Page 35 Notes...
-
Page 36: Our Product Range
Our Product Range Generators Mini Dumpers Leisure Inverter, Petrol, Diesel And Built-In 4-Wheel Drive Mini Dumper / Power Barrow Motorhome Generators Yard Sweeper Pressure Washers Self Propelled Yard Sweeper Power Brush Petrol, Diesel And Electric Pressure Washers Water Pumps Scarifiers Submersible, Clean And Dirty Water And Petrol Lawn Scarifier And Aerator Professional Chemical Water Pumps... -
Page 37: Useful Information
Register your warranty within 30 days of purchase at: To leave a review, please go to: www.hyundaipowerequipment.co.uk/warranty uk.trustpilot.com/review/hyundaipowerequipment.co.uk Full warranty terms and conditions can be found on the HYUNDAI POWER PRODUCTS Ordering Spare Parts website: www.hyundaipowerproducts.co.uk Only use original spare parts: The Manual Updates... -
Page 38: Contact Us
Need Help? Talk To Our Experts Contact Us Our friendly aftersales team will be more than happy to help you. Phone Call our team on 01646 687880, open Monday-Friday 8.30am-5pm. Email aftersales@hyundaipowerproducts.co.uk Online Live Chat Go to www.hyundaipowerproducts.co.uk Live chat is open Monday-Friday from 8.30am-5pm. Post Genpower Limited, Isaac Way, Pembroke Dock, Pembrokeshire, SA72 4RW, UK. -
Page 39: Declaration Of Conformity
Declaration Of Conformity... - Page 40 Isaac Way, London Road, Pembroke Dock, UNITED KINGDOM, SA72 4RW T: +44 (0) 1646 687 880 F: +44 (0) 1646 686 198 E: info@hyundaipowerproducts.co.uk www.hyundaipowerproducts.co.uk Imported/Distributed by Genpower Ltd for The United Kingdom & Ireland Licensed by Hyundai Corporation, Korea...